Identify the Metal Pin on Your Salvimar Watch

Start by locating the metal pin on the upper side of your watch strap that supports the watch arm on the dial.

Remove the Metal Pin

Firmly push the pin using a flat-head screwdriver. Once the pin is sufficiently exposed, use pliers to remove it.

Remove the Watch Strap

You can now remove one part of your watch strap.

Unscrew the Back Cover

Using a suitable Phillips screwdriver, unscrew the four screws of your watch’s back cover.

Open the Back Cover

Gently lift the back cover.

Access the Battery

Press firmly on the battery and push upward to open the battery compartment.

Change the Battery

Proceed with changing the battery and close the compartment.

Reassemble Your Salvimar Watch

The reassembly step is crucial; pay attention to the following details!

The back cover contains a waterproof section that matches the diameter of your battery. Make sure this waterproof part is correctly positioned on the new battery.

Carefully screw in the four screws of the back cover.

Final Checks

Perform a visual check of your watch dial. If the watch lights up, the operation is successful!

Reattach the watch arm and align it properly to reinstall the metal pin.